HC-Synthetic High-Performance Low-Friction Engine Oil
Properties
Astron Galaxy LLi 5W-30 is a HC-synthetic high-performance low-friction engine oil for commercial vehicles. The oil is a low-SAPS product with significantly reduced sulphated ash, phosphorus and sulphur content. Thanks to the use of high-performance additives, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits in the engine and on pistons that could otherwise impair the performance of the engine. At very low ambient temperatures, Astron Galaxy LLi 5W-30 guarantees reliable cold start and fast oil supply to all lube points. It is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption is reduced and the service life of the engine is prolonged.
Use instructions
Astron Galaxy LLi 5W-30 has been specially developed for the economic supply of emission-optimised engines with exhaust gas aftertreatment systems (Euro IV and V). The product is also recommended for use in CNG engines. Astron Galaxy LLi 5W-30 is designed for year-round use under any operating conditions and ensures that exhaust gas aftertreatment systems can work efficiently over significantly prolonged oil change intervals.
- Specifications: ACEA A3/ B3/ B4, API SN/ CF
- Recommendations*: MB 229.3/ 229.5, VW-Norm 502.00/ 505.00, BMW Longlife-01
| TYPICAL VALUES | METHOD | UNIT | ASTRON Galaxy LLi |
| SAE class | DIN 51 511 | – | 5W-30 |
| Density at 15°C | DIN 51 757 | g/cm3 | 0.858 |
| Viscosity at -30°C | DIN 51 377 | mPa s | 5500 |
| Viscosity at 40°C | DIN 51 562 | mm2/s | 68 |
| Viscosity at 100°C | DIN 51 562 | mm2/s | 12.2 |
| Viscosity index (VI) | DIN ISO 2909 | – | 178 |
| COC flash point | DIN ISO 2592 | °C | 235 |
| Pour point | DIN ISO 3016 | °C | – 36 |
| Total base number | DIN ISO 3771 | mgKOH/g | 10.4 |
| Sulphated ash | DIN 51 575 | g/100 g | 1.17 |
The above values may vary within commercially accepted tolerances.
* meets the requirements of the OEM manufacturer